Siemens SITRANS F - 6.3 HOW TO SET UP FUE1010 EN FOR FLOW TUBE OPERATION

Setup
3.6 Local display
FST030
206 Function Manual, 04/2017, A5E35693328-AA
3.6.5.2
1st value
Description
The display
1st process value
can be selected. This process value is shown in all view types.
Setting Volume flow; Mass flow; Standard volume flow; Flow velocity; Sound velocity; Liquid identi-
fier; LiquIdent; Density; Kinematic viscosity; Totalizer 1; Totalizer 2; Totalizer 3; Pressure;
Medium temperature; Standard density; Standard Kinematic viscosity; API gravity; Stand-
ard API gravity; Specific gravity; Standard specific gravity
Default
Volume flow
Related
Path
Setup → Local display → View 1 → 1st value
3.6.5.3
Graph scale mode
Description
Graph scale mode
Setting
Auto; Fixed
Default
Auto
Related
Path
Setup → Local display → View 1 → Graph scale mode
3.6.5.4
2nd value
Description
The display
2nd process value
can be selected.
Setting
Volume flow; Mass flow; Flow velocity; Sound velocity; Density; Kinematic viscosity; Total-
izer 1; Totalizer 2; Totalizer 3; Pressure; Medium temperature
Default
Density
Related
This parameter is only available if
View 1
is set to Three values, Six values or Six diagnostic
values.
Path
Setup → Local display → View 1 → 2nd value