Siemens SITRANS F - 1 St Value; 2 Nd Value

Setup
3.6 Local display
FST030
224 Function Manual, 04/2017, A5E35693328-AA
Related
If Single Value or Dosing is selected,
1st Process Value
must be configured.
If Three Values is selected,
1st Process Value
,
2nd Process Value
and
3rd Process Value
must be configured.
If Totalizer or 1 Value and Graph is selected,
1st Process Value
,
Trend Scale Mode
and
Trend log time window
must be configured.
If 1 Value and Bargraph is selected,
1st Process Value
must be configured.
If Six Values or Six Diagnostic Values is selected,
1st Process Value
,
2nd Process Value
,
3rd Process Value
,
4th Process Value
,
5th Process Value
, and
6th Process Value
must be
configured.
Path
Setup → Local display → View 5 → View
3.6.9.3
1st value
Description
The display
1st Process Value
can be selected. This process value is shown in all view
types.
Setting Volume flow; Mass flow; Flow velocity; Sound velocity; Density; Kinematic viscosity; Total-
izer 1; Totalizer 2; Totalizer 3; Pressure; Medium temperature
Default
Totalizer 1
Related
Path
Setup → Display → View 5 → 1st value
3.6.9.4
2nd value
Description
The display
2nd Process Value
can be selected.
Setting
Volume flow; Mass flow; Flow velocity; Sound velocity; Density; Kinematic viscosity; Total-
izer 1; Totalizer 2; Totalizer 3; Pressure; Medium temperature
Default
Density
Related
This parameter is only available if
View
is set to Three Values, Six Values or Six Diagnostic
Values.
Path
Setup → Display → View 5 → 2nd value