Siemens SITRANS F - Pulse Output

Setup
3.4 Inputs and outputs
FST030
174 Function Manual, 04/2017, A5E35693328-AA
Related
Path Setup → Inputs and outputs → Channel 4 - input/output → Frequency output → Fail-safe
value
3.4.7.7
Pulse output
3.4.7.7.1 Process value
Description
Select process value for the pulse output.
Setting
Mass flow; Volume flow; Standard volume flow rate (only hydrocarbon and gas applica-
tions)
Default
Volume flow
Related
Path
Setup → Inputs and outputs → Channel 4 - input/output → Pulse output → Process value
3.4.7.7.2 Direction
Description
Flow direction filter.
Setting
Positive; Negative; Bidrectional; Bidirectional (symmetric)
Default
Positive
Related
Path
Setup → Inputs and outputs → Channel 4 - input/output → Pulse output → Direction
3.4.7.7.3 Pulse units
Description
Units of pulse duration values of Ch4 in pulse mode.
Setting
Volume: l (liters); hl (hectoliters); m³ (cubic meters); gal (US gallons); i.gal (Imperial gal-
lons); BBL31.5 (1 barrel = 31.5 US gallons); BBL31 (1 barrel = 31 US gallons); BBL42 (1
barrel = 42 US gallons); in³ (cubic inches); ft³ (cubic feet); yd³ (cubic yards); bush (bush-
els); Mass: g (grams); kg (kilograms); t (1 t = 1000 kg); STon (1 STon = 2000 lb); T (1 T =
2240 lb); oz (ounces); lb (pounds); Standard volume: Nl (normal liters); Nm³ (normal cubic
meters); Sl (standard liters); Sft³ (standard cubic feet); Sm³ (standard cubic meters); cus-
tom units (see Custom units / Custom conversion factor
Default
I (liters)