Siemens SITRANS F - Page 175

Setup
3.4 Inputs and outputs
FST030
Function Manual, 04/2017, A5E35693328-AA
173
Setting
0.0 s to 100.0 s
Default
0.0 s
Related
Path
Setup → Inputs and outputs → Channel 4 - input/output → Frequency output → Damping
value
3.4.7.6.8 Fail-safe behaviour
Description
Frequency output reaction in case of a fault.
Setting
Minimum frequency; Maximum frequency; Last valid value; Current valid; fail-safe value
Default
Last valid value
Related
Path
Setup → Inputs and outputs → Channel 4 - input/output → Frequency output → Fail-safe
behaviour
3.4.7.7.9 Fail-safe minimum time
Description
Minimum time the output stays in fail-safe mode.
Setting
0 s to 100 s
Default
0 s
Related
Path
Setup → Inputs and outputs → Channel 4 - input/output → Frequency output → Fail-safe
minimum time
3.4.7.6.10 Fail-safe value
Description
Output value in case of a fault and when fail-safe mode configured to fail-safe value.
Setting
0.0 Hz to 12500.0 Hz
Default
0.0 Hz