Siemens SITRANS F - Density Unit; Kinematic Viscosity Unit; Pressure Unit

Communication
5.3 Modbus (Channel 1)
FST030
326 Function Manual, 04/2017, A5E35693328-AA
5.3.8.6
Density unit
Description
Set the unit for density values.
Setting Metric: Microgram → μg/l; μg/m
3
Milligram → mg/l
Gram → g/ml; g/cm
3
; g/l
Kilogram → kg/l; kg/m
3
US: Pound → lb/in
3
; lb/gal; lb/ft
3
Short ton → STon/yd
3
Custom unit
Default
kg/m
3
Related
Path
Communications → Modbus (Channel 1) → Modbus units → Density unit
5.3.8.7
Kinematic viscosity unit
Description
Set the unit for kinematic viscosity values.
Setting
cSt
Default
cSt
Related
Path
Communications → Modbus (Channel 1) → Modbus units → Kinematic viscosity unit
5.3.8.8
Pressure unit
Description
Set the unit for pressure values.
Setting Metric: (0 °C) → mmHg (0 °C); cmHg (0 °C); inHg (0 °C); mHg (0 °C)
(4 °C) → mmH2O (4 °C); cmH2O (4 °C); mH2O (4 °C); inH2O (4 °C); ftH2O
(4 °C)
Pa; kPa; hPa; MPa; atm; bar; mbar; torr; gf/cm²; kgf/cm²; kg/m²
US: (60 °F) → ftH2O (60 °F)
(68 °F) → inH2O (68 °F); ftH2O (68 °F); mmH2O (68 °F)
psi; lb/ft²;
Default
Pa