Siemens SITRANS F - View; 1 St Value; 2 Nd Process Value

Setup
3.6 Local display
FST030
210 Function Manual, 04/2017, A5E35693328-AA
3.6.6.2
View
Description
The display View 2 can be configured.
Setting Single value; Three values; Totalizer; 1 value and bargraph; 1 value and graph; Six values;
Six diagnostic values; Alarm list
Default
Single value
Related
If Single value or Dosing is selected,
1st process value
must be configured.
If Three values is selected,
1st process value
,
2nd process value
and
3rd process value
must be configured.
If Totalizer or 1 value and graph is selected,
1st process value
,
Trend scale mode
and
Trend
log time window
must be configured.
If 1 value and bargraph is selected,
1st process value
must be configured.
If Six values or Six diagnostic values is selected,
1st process value
,
2nd process value
,
3rd
process value
,
4th process value
,
5th process value
, and
6th process value
must be
configured.
Path
Setup → Local display → View 2 → View
3.6.6.3
1st value
Description
The display
1st Process Value
can be selected. This process value is shown in all view
types.
Setting
Volume flow; Mass flow; Standard volume flow; Flow velocity; Sound velocity; Liquid identi-
fier; LiquIdent; Density; Kinematic viscosity; Totalizer 1; Totalizer 2; Totalizer 3; Pressure;
Medium temperature; Standard density; Standard Kinematic viscosity; API gravity; Stand-
ard API gravity; Specific gravity; Standard specific gravity
Default
Volume flow
Related
Path
Setup → Local display → View 2 → 1st value
3.6.6.4
2nd process value
Description
The display
2nd Process Value
can be selected.