Siemens SITRANS F - Kinematic Viscosity Units; Pressure Units

Communication
5.2 HART (Channel 1)
FST030
Function Manual, 04/2017, A5E35693328-AA
317
Setting Metric: Microgram → μg/l; μg/m
3
Milligram → mg/l
Gram → g/ml; g/cm
3
; g/l
Kilogram → kg/l; kg/m
3
US: Pound → lb/in
3
; lb/gal; lb/ft
3
Short ton → STon/yd
3
Default
kg/m
3
Related
Path
Communication → HART (Channel 1) → HART units → Density units
5.2.8.7
Kinematic viscosity units
Description
The kinematic viscosity units for the communication interface can be configured.
Setting
cSt (centistoke = 1 mm
2
/3)
Default
cSt
Related
Path
Communication → HART (Channel 1) → HART units → Kinematic viscosity units
5.2.8.8
Pressure units
Description
The pressure units for the communication interface can be configured.
Setting Metric:
mbar; bar; Pa; kPa; hPa; MPa; kgf/cm
2
; mmH2O (millimeters of water at 68
°F); mmH2O (millimeters of water at 4 °C); mmHg (millimeters of mercury
at 0 °C); hPa (hectopascal); atm; torr; cmH2O (centimeters of water at 4
°C); mH2O (meters of water at 4 °C); cmHg (centimeters of mercury at 0
°C); mHg (meters of mercury at 0 °C); gf/cm
2
(grams force per square cm);
kg/m
2
(kilograms per square meter); ftH20 (feet of water at 60 °F)
US: psi; lb/ft
2
(pounds per square foot); inH20 (inches of water at 4 °C); ftH20
(feet of water at 4 °C); inHg (inches of mercury at 0 °C); inH20 (inches of
water at 68 °F); ftH2O (@60 °F); ftH20 (feet of water at 68 °F)
Default
Pa
Related
Path
Communication → HART (Channel 1) → HART units → Pressure