Siemens SITRANS F - View; 1 St Process Value; 2 Nd Process Value

Setup
3.6 Local display
FST030
228 Function Manual, 04/2017, A5E35693328-AA
3.6.10.2
View
Description
The display View 6 can be configured.
Setting Single value; Three values; Totalizer; Dosing; 1 value and bargraph; 1 value and graph;
Six values; Six diagnostic values; Alarm list
Default
Alarm list
Related
If Single Value or Dosing is selected,
1st Process Value
must be configured.
If Three Values is selected,
1st Process Value
,
2nd Process Value
and
3rd Process Value
must be configured.
If Totalizer or 1 Value and Graph is selected,
1st Process Value
,
Trend Scale Mode
and
Trend log time window
must be configured.
If 1 Value and Bargraph is selected,
1st Process Value
must be configured.
If Six Values or Six Diagnostic Values is selected,
1st Process Value
,
2nd Process Value
,
3rd Process Value
,
4th Process Value
,
5th Process Value
, and
6th Process Value
must be
configured.
Path
Setup → Local display → View 6 → View
3.6.10.3
1st process value
Description
The display
1st Process Value
can be selected. This process value is shown in all view
types.
Setting
Mass flow; Volume flow; Density; Fluid Temperature; Corrected Volume flow; Reference
Density; Totalizer 1; Totalizer 2; Totalizer 3
Default Massflow
Related
Path
Setup → Display → View 6 → 1st Process Value
3.6.10.4
2nd process value
Description
The display
2nd Process Value
can be selected.
Setting
Mass flow; Volume flow; Density; Fluid Temperature; Corrected Volume flow; Reference
Density; Totalizer 1; Totalizer 2; Totalizer 3
Default
Density