Siemens SITRANS F - Page 98

Setup
3.3 Totalizers
FST030
96 Function Manual, 04/2017, A5E35693328-AA
Setting Process value = Mass flow: -9999997952 kg to +9999997952 kg
Process value = Volume flow: -9999997952 m³ to +9999997952 m³
Process value = Standard volume flow: -9999997952 Sm³ to +9999997952 Sm³
Default Process value = Mass flow: +9999997952 kg
Process value = Volume flow: +9999997952 m³
Process value = Standard volume flow: +9999997952 Sm³
Related
Path
Setup → Totalizers → Totalizer 3 → Alarm and warning limits → Upper warning limit
3.3.3.10.3 Lower warning limit
Description
Warning is triggered if Totalizer 3 value is below the limit.
Setting Process value = Mass flow: -9999997952 kg to +9999997952 kg
Process value = Volume flow: -9999997952 m³ to +9999997952 m³
Process value = Standard volume flow: -9999997952 Sm³ to +9999997952 Sm³
Default Process value = Mass flow: -9999997952 kg
Process value = Volume flow: -9999997952 m³
Process value = Standard volume flow: -9999997952 Sm³
Related
Path
Setup → Totalizers → Totalizer 3 → Alarm and warning limits → Lower warning limit
3.3.3.10.4 Lower alarm limit
Description
Alarm is triggered if Totalizer 3 value is below the limit.
Setting Process value = Mass flow: -9999997952 kg to +9999997952 kg
Process value = Volume flow: -9999997952 m³ to +9999997952 m³
Process value = Standard volume flow: -9999997952 Sm³ to +9999997952 Sm³
Default Process value = Mass flow: -9999997952 kg
Process value = Volume flow: -9999997952 m³
Process value = Standard volume flow: -9999997952 Sm³
Related
Path
Setup → Totalizers → Totalizer 3 → Alarm and warning limits → Lower alarm limit