Siemens SITRANS F - Page 142

Setup
3.4 Inputs and outputs
FST030
140 Function Manual, 04/2017, A5E35693328-AA
Setting Mass flow; Volume flow; Standard volume flow rate (only hydrocarbon and gas applica-
tions)
Default
Volume flow
Related
Path
Setup → Inputs and outputs → Channel 3 - input/output → Pulse output → Process value
3.4.5.7.3 Direction
Description
Flow direction filter.
Setting
Positive; Negative; Bidirectional; Bidirectional (symmetric)
Default
Positive
Related
Path
Setup → Inputs and outputs → Channel 3 - input/output → Pulse output → Direction
3.4.5.7.4 Pulse units
Description
Units of pulse duration values of Ch3 in pulse mode.
Setting
Volume: l (liters); hl (hectoliters); m³ (cubic meters); gal (US gallons); i.gal (Imperial gal-
lons); BBL31.5 (1 barrel = 31.5 US gallons); BBL31 (1 barrel = 31 US gallons); BBL42 (1
barrel = 42 US gallons); in³ (cubic inches); ft³ (cubic feet); yd³ (cubic yards); bush (bush-
els); Mass: g (grams); kg (kilograms); t (1 t = 1000 kg); STon (1 STon = 2000 lb); T (1 T =
2240 lb); oz (ounces); lb (pounds); Standard volume: Nl (normal liters); Nm³ (normal cubic
meters); Sl (standard liters); Sft³ (standard cubic feet); Sm³ (standard cubic meters); cus-
tom units (see Custom units / Custom conversion factor)
Default
I (liters)
Related
Path
Setup → Inputs and outputs → Channel 2 - output → Pulse output → Pulse units
3.4.5.7.5 Custom units
Description
User specific string to define custom pulse units.
Setting
-
Default
-