Siemens SITRANS F - 5.3 PIPE CONSIDERATIONS FOR CLAMP-ON TRANSDUCER

Setup
3.4 Inputs and outputs
FST030
186 Function Manual, 04/2017, A5E35693328-AA
3.4.7.9.4 Forced value (Ch3)
Description
Forced value when forcing is active.
Setting
3.5 mA to 25 mA
Default
4.0 mA
Related
Path
Setup → Inputs and outputs → Channel 4 - input/output → Digital intput → Forced value
(Ch3)
3.4.7.9.5 Delay time
Description
The debounce time used to delay the hardware input signal can be configured.
Setting
0.0 ms; 0.5 ms; 1 ms; 1.5 ms; 2 ms; 2.5 ms; 3 ms; 3.5 ms; 4 ms; 4.5 ms; 5 ms; 5.5 ms; 6
ms; 6.5 ms; 7 ms; 7.5 ms
Default
0.0 ms
Related
Path
Setup → Inputs and outputs → Channel 4 - input/output → Digital input → Delay time
3.4.7.9.6 Polarity
Description
Logical polarity of discrete input signal.
Setting
Active high level; Active low level
Default
Active high level
Related
Path
Setup → Inputs and outputs → Channel 4 - input/output → Digital input → Polarity