Siemens SITRANS F - Page 48

Setup
3.2 Process values
FST030
46 Function Manual, 04/2017, A5E35693328-AA
3.2.1.6.2 Upper warning limit
Description
Exceeding this limit causes a warning.
Setting
-896.40 m
3
/h to 896.40 m
3
/h
Default
896.40 m
3
/h
Related
Path
Setup → Process values → Volume flow → Alarm and warning limits → Upper warning limit
3.2.1.6.3 Lower warning limit
Description
Falling below this limit causes a warning.
Setting
-896.40 m
3
/h to 896.40 m
3
/h
Default
896.40 m
3
/h
Related
Path Setup → Process values → Volume flow → Alarm and warning limits → Lower warning limit
3.2.1.6.4 Lower alarm limit
Description
Set Lower alarm limit. Alarm is triggered if measured value is below the limit.
Setting
-896.40 m
3
/h to 896.40 m
3
/h
Default
896.40m
3
/h
Related
Path
Setup → Process values → Volume flow → Alarm and warning limits → Lower alarm limit
3.2.1.6.5 Hysteresis
Description
Sets the hysteresis for alarm and warning limits. The hysteresis is the distance between the
limits for activation and deactivation of an alarm/warning.
Setting
0.00 m
3
/h to 896.40 m
3
/h
Default
0.0 m
3
/h