Setup
3.2 Process values
FST030
66 Function Manual, 04/2017, A5E35693328-AA
Path
Setup → Process values → Kinematic viscosity → Alarm and warning limits → Upper warning
limit
3.2.8.3.3 Lower warning limit
Description
If process value falls below this limit a warning is triggered.
Setting -9999997952 m²/s to +9999997952 m²/s
Path
Setup → Process values → Kinematic viscosity → Alarm and warning limits → Lower warning
limit
3.2.8.3.4 Lower alarm limit
Description
If process value falls below this limit an alarm is triggered.
-9999997952 m²/s to +9999997952 m²/s
Path
Setup → Process values → Kinematic viscosity → Alarm and warning limits → Lower alarm
3.2.8.3.5 Hysteresis
Description
Sets the hysteresis for alarm and warning limits. The hysteresis is the distance between the
limits for activation and deactivation of an alarm/warning.
0.00 m²/s to +9999997952 m²/s
Setup → Process values → Kinematic viscosity → Alarm and warning limits → Hysteresis
To Next Page
Loading...
