Siemens SITRANS F - Page 77

Setup
3.2 Process values
FST030
Function Manual, 04/2017, A5E35693328-AA
75
3.2.12.3.2 Upper warning limit
Description
Exceeding this limit causes a warning.
Setting
-9999997952 m²/s to +9999997952 m²/s
Default
+9999997952 m²/s
Related
Path
Setup → Process values → Standard kinematic viscosity → Alarm and warning limits → Up-
per warning limit
3.2.12.3.3 Lower warning limit
Description
Falling below this limit causes a warning.
Setting
-9999997952 m²/s to +9999997952 m²/s
Default
-9999997952 m²/s
Related
Path
Setup → Process values → Standard kinematic viscosity → Alarm and warning limits →
Lower warning limit
3.2.12.3.4 Lower alarm limit
Description
Falling below this limit causes an alarm.
Setting
-9999997952 m²/s to +9999997952 m²/s
Default
-9999997952 m²/s
Related
Path
Setup → Process values → Standard kinematic viscosity → Alarm and warning limits →
Lower alarm limit
3.2.12.3.5 Hysteresis
Description
Sets the hysteresis for alarm and warning limits. The hysteresis is the distance between the
limits for activation and deactivation of an alarm/warning.