Siemens SITRANS F - Page 93

Setup
3.3 Totalizers
FST030
Function Manual, 04/2017, A5E35693328-AA
91
Setting
Process value = Mass flow: -9999997952 kg to +9999997952 kg
Process value = Volume flow: -9999997952 m³ to +9999997952 m³
Process value = Standard volume flow: -9999997952 Sm³ to +9999997952 Sm³
Default Process value = Mass flow: +9999997952 kg
Process value = Volume flow: +9999997952 m³
Process value = Standard volume flow: +9999997952 Sm³
Related
Path
Setup → Totalizers → Totalizer 2 → Alarm and warning limits → Upper warning limit
3.3.2.10.3 Lower warning limit
Description
Warning is triggered if Totalizer 2 value is below the limit.
Setting
Process value = Mass flow: -9999997952 kg to +9999997952 kg
Process value = Volume flow: -9999997952 m³ to +9999997952 m³
Process value = Standard volume flow: -9999997952 Sm³ to +9999997952 Sm³
Default Process value = Mass flow: -9999997952 kg
Process value = Volume flow: -9999997952 m³
Process value = Standard volume flow: -9999997952 Sm³
Related
Path
Setup → Totalizers → Totalizer 2 → Alarm and warning limits → Lower warning limit
3.3.2.10.4 Lower alarm limit
Description
Alarm is triggered if Totalizer 2 value is below the limit.
Setting
Process value = Mass flow: -9999997952 kg to +9999997952 kg
Process value = Volume flow: -9999997952 m³ to +9999997952 m³
Process value = Standard volume flow: -9999997952 Sm³ to +9999997952 Sm³
Default Process value = Mass flow: -9999997952 kg
Process value = Volume flow: -9999997952 m³
Process value = Standard volume flow: -9999997952 Sm³
Related
Path
Setup → Totalizers → Totalizer 2 → Alarm and warning limits → Lower alarm limit