B
ASIC
C
ONFIGURATION
3-27
Saving or Restoring Configuration Settings
You can upload/download configuration settings to/from a TFTP server.
The configuration files can be later downloaded to restore the switch’s
settings.
Command Usage
• When updating the PoE controller, first copy the PD controller file from
a TFTP server to the switch's file system (tftp to file), and then copy this
file to the controller (file to file).
• When specifying the file type “PD_Controller” or “PoE” for copy
operations via the web or CLI, file types other than PoE controller may
be downloaded, but will not adversely affect the system.
Command Attributes
• File Transfer Method – The configuration copy operation includes
these options:
- file to file – Copies a file within the switch directory, assigning it a
new name.
- file to running-config – Copies a file in the switch to the running
configuration.
- file to startup-config – Copies a file in the switch to the startup
configuration.
- file to tftp – Copies a file from the switch to a TFTP server.
- running-config to file – Copies the running configuration to a file.
Console#copy tftp file 4-88
TFTP server ip address: 192.168.1.23
Choose file type:
1. config: 2. opcode: <1-2>: 2
Source file name: V2.2.7.1.bix
Destination file name: V2271.F
\Write to FLASH Programming.
-Write to FLASH finish.
Success.
Console#config
Console(config)#boot system opcode:V2271.F
4-95
Console(config)#exit
Console#reload
4-30
To Next Page
Loading...
Need help?
General
