4-260
This example creates a class map call “rd_class,” and sets it to match
packets marked for DSCP service value 3:
Related Commands
show class map (4-266)
match
This command defines the criteria used to classify traffic. Use the no form
to delete the matching criteria.
Syntax
[no] match {access-list acl-name | ip dscp dscp | ip precedence
ip-precedence | vlan vlan}
- acl-name - Name of the access control list. Any type of ACL can be
specified, including standard or extended IP ACLs and MAC ACLs.
(Range: 1-16 characters)
- dscp - A DSCP value. (Range: 0-63)
- ip-precedence - An IP Precedence value. (Range: 0-7)
- vlan - A VLAN. (Range:1-4094)
Default Setting
None
Command Mode
Class Map Configuration
Command Usage
• First enter the class-map command to designate a class map and enter
the Class Map configuration mode. Then use the match command to
specify the fields within ingress packets that must match to qualify for
this class map.
• Only one match command can be entered per class map.
Example
Console(config)#class-map rd_class match-any
Console(config-cmap)#match ip dscp 3
Console(config-cmap)#
To Next Page
Loading...
Need help?
General
