4-238
(Range: 1-4094, no leading zeroes).
Default Setting
None
Command Mode
VLAN Configuration
Command Usage
Secondary VLANs provide security for group members. The associated
primary VLAN provides a common interface for access to other
network resources within the primary VLAN (e.g., servers configured
with promiscuous ports) and to resources outside of the primary
VLAN (via promiscuous ports).
Example
switchport mode private-vlan
Use this command to set the private VLAN mode for an interface. Use the
no form to restore the default setting.
Syntax
switchport mode private-vlan {host | promiscuous}
no switchport mode private-vlan
- host – This port type can subsequently be assigned to a community
or isolated VLAN.
- promiscuous – This port type can communicate with all other
promiscuous ports in the same primary VLAN, as well as with all
the ports in the associated secondary VLANs.
Default Setting
Normal VLAN
Command Mode
Interface Configuration (Ethernet, Port Channel)
Console(config-vlan)#private-vlan 2 association 3
Console(config)#
To Next Page
Loading...
Need help?
General
