4-294
show ip redirects
This command shows the default gateway configured for this device.
Default Setting
None
Command Mode
Privileged Exec
Example
Related Commands
ip default-gateway (4-292)
ping
This command sends ICMP echo request packets to another node on the
network.
Syntax
ping host [size size] [count count]
- host - IP address or IP alias of the host.
- size - Number of bytes in a packet. (Range: 32-512, default: 32)
The actual packet size will be eight bytes larger than the size
specified because the switch adds header information.
- count - Number of packets to send. (Range: 1-16, default: 5)
Default Setting
This command has no default for the host.
Command Mode
Normal Exec, Privileged Exec
Command Usage
• Use the ping command to see if another site on the network can be
reached.
• Following are some results of the ping command:
Console#show ip redirects
IP default gateway 10.1.0.254
Console#
To Next Page
Loading...
Need help?
General
