SMC Networks TigerSwitch SMC6128PL2 User Manual

L INE C OMMANDS
4-23
Default Setting
8 data bits per character
Command Mode
Line Configuration
Command Usage
The databits command can be used to mask the high bit on input
from devices that generate 7 data bits with parity. If parity is being
generated, specify 7 data bits per character. If no parity is required,
specify 8 data bits per character.
Example
To specify 7 data bits, enter this command:
Related Commands
parity (4-23)
parity
This command defines the generation of a parity bit. Use the no form to
restore the default setting.
Syntax
parity {none | even | odd}
no parity
- none - No parity
- even - Even parity
- odd - Odd parity
Default Setting
No parity
Command Mode
Line Configuration
Command Usage
Console(config-line)#databits 7
Console(config-line)#

SMC Networks TigerSwitch SMC6128PL2 Specifications

General

Brand	SMC Networks
Model	TigerSwitch SMC6128PL2
Category	Switch
Language	English