SMC Networks TigerSwitch SMC6128PL2

I NTERFACE C OMMANDS
4-165
interface
• ethernet unit/port
• unit - Stack unit. (Always unit 1)
• port - Port number. (Range: 1-52)
• port-channel channel-id (Range: 1-8)
Default Setting
None
Command Mode
Privileged Exec
Command Usage
Statistics are only initialized for a power reset. This command sets the
base value for displayed statistics to zero for the current management
session. However, if you log out and back into the management
interface, the statistics displayed will show the absolute value
accumulated since the last power reset.
Example
The following example clears statistics on port 5.
show interfaces status
This command displays the status for an interface.
Syntax
show interfaces status [interface]
interface
• ethernet unit/port
• unit - Stack unit. (Always unit 1)
• port - Port number. (Range: 1-52)
• port-channel channel-id (Range: 1-8)
• vlan vlan-id (Range: 1-4094)
Default Setting
Console#clear counters ethernet 1/5
Console#