P
ORT
C
ONFIGURATION
3-109
• Media Type
3
– Media type used for the combo ports. (Options:
Coppper-Forced, SFP-Forced, or SFP-Preferred-Auto; Default:
SFP-Preferred-Auto)
• Trunk Member
4
– Shows if port is a trunk member.
• Creation
5
– Shows if a trunk is manually configured or dynamically set
via LACP.
Web – Click Port, Port Information or Trunk Information.
Figure 3-48. Displaying Port/Trunk Information
Field Attributes (CLI)
Basic Information:
• Port type – Indicates the port type. (100BASE-TX, 1000BASE-T, or
SFP)
3.
Port information only.
4.
Port information only.
5.
Trunk information only.
To Next Page
Loading...
Need help?
General
