SNMP C
OMMANDS
4-147
Example
Related Commands
snmp-server host (4-141)
show snmp engine-id
This command shows the SNMP engine ID.
Command Mode
Privileged Exec
Example
This example shows the default engine ID.
Console(config)#snmp-server engine-id local 12345
Console(config)#snmp-server engineID remote 54321 192.168.1.19
Console(config)#
Console#show snmp engine-id
Local SNMP engineID: 8000002a8000000000e8666672
Local SNMP engineBoots: 1
Remote SNMP engineID IP
address
80000000030004e2b316c54321
192.168.1.19
Console#
show snmp engine-id - display description
Field Description
Local SNMP
engineID
String identifying the engine ID.
Local SNMP
engineBoots
The number of times that the engine has (re-)initialized since
the snmp EngineID was last configured.
Remote SNMP
engineID
String identifying an engine ID on a remote device.
IP address IP address of the device containing the corresponding
remote SNMP engine.
To Next Page
Loading...
Need help?
General
