C
OMMAND
L
INE
I
NTERFACE
4-130
access-list mac
This command adds a MAC access list and enters MAC ACL configuration
mode. Use the no form to remove the specified ACL.
Syntax
[no] access-list mac acl_name
acl_name – Name of the ACL. (Maximum length: 16 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
•When you create a new ACL or enter configuration mode for an existing
ACL, use the permit or deny command to add new rules to the
bottom of the list. To create an ACL, you must add at least one rule to
the list.
•To remove a rule, use the no permit or no deny command followed by
the exact text of a previously configured rule.
•An ACL can contain up to 32 rules.
Example
show mac
access-list
Displays the rules for configured MAC
ACLs
PE 4-13
3
mac access-group Adds a port to a MAC ACL IC 4-13
3
show mac
access-group
Shows port assignments for MAC ACLs PE 4-13
4
Console(config)#access-list mac jerry
Console(config-mac-acl)#
MAC ACL Commands
Command Function Mode
Pag
e
To Next Page
Loading...
Need help?
General
