4-254
None
Command Mode
Privileged Exec
Example
Priority Commands (Layer 3 and 4)
map ip dscp (Global Configuration)
This command enables IP DSCP mapping (i.e., Differentiated Services
Code Point mapping). Use the no form to disable IP DSCP mapping.
Syntax
[no] map ip dscp
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
• The precedence for priority mapping is IP DSCP, and default
switchport priority.
Example
Console#show queue cos-map ethernet 1/1
Information of Eth 1/1
Traffic Class : 0 1 2 3 4 5 6 7
Priority Queue: 1 0 0 1 2 2 3 3
Console#
Priority Commands (Layer 3 and 4)
Command Function Mod
e
Page
map ip dscp Enables IP DSCP class of service mapping GC 4-254
map ip dscp Maps IP DSCP value to a class of service IC 4-255
show map ip dscp Shows the IP DSCP map PE 4-256
To Next Page
Loading...
Need help?
General
