EasyManua.ls Logo

SMC Networks TigerSwitch SMC6128PL2

SMC Networks TigerSwitch SMC6128PL2
658 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4-306
Related Commands
ip dhcp snooping (4-301)
ip dhcp snooping vlan (4-304)
ip dhcp snooping verify mac-address
This command verifies the client’s hardware address stored in the DHCP
packet against the source MAC address in the Ethernet header. Use the no
form to disable this function.
Syntax
[no] ip dhcp snooping verify mac-address
Default Setting
Enabled
Command Mode
Global Configuration
Command Usage
If MAC address verification is enabled, and the source MAC address in
the Ethernet header of the packet is not same as the client’s hardware
address in the DHCP packet, the packet is dropped.
Example
This example enables MAC address verification.
Related Commands
ip dhcp snooping (4-301)
ip dhcp snooping vlan (4-304)
ip dhcp snooping trust (4-305)
Console(config)#ip dhcp snooping verify mac-address
Console(config)#

Table of Contents

Other manuals for SMC Networks TigerSwitch SMC6128PL2

Related product manuals