SMC Networks TigerSwitch SMC6128PL2 - DHCP Snooping Port Configuration; Figure 3-112. DHCP Snooping Port Configuration

DHCP S NOOPING
3-251
CLI – This example enables DHCP Snooping Information Option, and
sets the policy as replace
.
DHCP Snooping Port Configuration
Configures switch ports as trusted or untrusted. An untrusted interface is
an interface that is configured to receive messages from outside the
network or firewall. A trusted interface is an interface that is configured to
receive only messages from within the network.
Command Attributes
• Trust Status – Enables or disables port as trusted.
Web – Click DHCP Snooping, Information Option Configuration.
Figure 3-112. DHCP Snooping Port Configuration
Console(config)#ip dhcp snooping information option 4-307
Console(config)#ip dhcp snooping information policy replace 4-307
Console(config)#