C
ONFIGURING
THE
S
WITCH
3-254
Command Attributes
• Filter Type – Configures the switch to filter inbound traffic based
source IP address, or source IP address and corresponding MAC
address. (Default: None)
- None – Disables IP source guard filtering on the port.
- SIP – Enables traffic filtering based on IP addresses stored in the
binding table.
- SIP-MAC – Enables traffic filtering based on IP addresses and
corresponding MAC addresses stored in the binding table.
Web – Click IP Source Guard, Port Configuration.
Figure 3-114. IP Source Guard Port Configuration
To Next Page
Loading...
Need help?
General
