4-272
ip igmp snooping leave-proxy
This command enables IGMP leave proxy on the switch. Use the no form
to disable the feature.
Syntax
[no] ip igmp snooping leave-proxy
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
• The IGMP snooping leave-proxy feature suppresses all unnecessary
IGMP leave messages so that the non-querier switch forwards an
IGMP leave packet only when the last dynamic member port leaves a
multicast group.
• The leave-proxy feature does not function when a switch is set as the
querier.
Example
ip igmp snooping immediate-leave
This command enables IGMP immediate leave for specific VLAN. Use
the no form to disable the feature for a VLAN.
Syntax
[no] ip igmp snooping immediate-leave
Default Setting
Disabled
Command Mode
Interface Configuration (VLAN)
Console(config)#ip igmp snooping leave-proxy
Console(config)#
To Next Page
Loading...
Need help?
General
