SMC Networks TigerSwitch SMC6128PL2 User Manual

C OMMAND L INE I NTERFACE
4-110
802.1X Port Authentication
The switch supports IEEE 802.1X (dot1x) port-based access control that
prevents unauthorized access to the network by requiring users to first
submit credentials for authentication. Client authentication is controlled
centrally by a RADIUS server using EAP (Extensible Authentication
Protocol).
802.1X Port Authentication
Command Function Mod
e
Pag
e
dot1x
system-auth-control
Enables dot1x globally on the switch. GC 4-11
1
dot1x default Resets all dot1x parameters to their default
values
GC 4-11
1
dot1x max-req Sets the maximum number of times that the
switch retransmits an EAP request/identity
packet to the client before it times out the
authentication session
IC 4-11
1
dot1x port-control Sets dot1x mode for a port interface IC 4-11
2
dot1x
operation-mode
Allows single or multiple hosts on an dot1x
port
IC 4-11
3
dot1x re-authenticate Forces re-authentication on specific ports PE 4-11
4
dot1x
re-authentication
Enables re-authentication for all ports IC 4-11
4
dot1x timeout
quiet-period
Sets the time that a switch port waits after
the Max Request Count has been exceeded
before attempting to acquire a new client
IC 4-11
5
dot1x timeout
re-authperiod
Sets the time period after which a connected
client must be re-authenticated
IC 4-11
6
dot1x timeout
tx-period
Sets the time period during an
authentication session that the switch waits
before re-transmitting an EAP packet
IC 4-11
6
show dot1x Shows all dot1x related information PE 4-11
8

SMC Networks TigerSwitch SMC6128PL2 Specifications

General

Brand	SMC Networks
Model	TigerSwitch SMC6128PL2
Category	Switch
Language	English