SMC Networks TigerSwitch SMC6128PL2 User Manual

S YSTEM M ANAGEMENT C OMMANDS
4-45
Telnet Server Commands
ip telnet port
This command specifies the TCP port number used by the Telnet
interface. Use the no form to use the default port.
Syntax
ip telnet port port-number
no ip telnet port
port-number - The TCP port to be used by the browser interface.
(Range:
1-65535)
Default Setting
23
Command Mode
Global Configuration
Example
Related Commands
ip telnet server (4-46)
Table 4-14 Telnet Server Commands
Command Function Mod
e
Pag
e
ip telnet port Specifies the port to be used by the Telnet
interface
GC 4-41
ip telnet server Allows the switch to be monitored or configured
from Telnet
GC 4-42
Console(config)#ip telnet port 123
Console(config)#

SMC Networks TigerSwitch SMC6128PL2 Specifications

General

Brand	SMC Networks
Model	TigerSwitch SMC6128PL2
Category	Switch
Language	English