C
ONFIGURING
THE
S
WITCH
3-212
Enabling IP DSCP Priority
The switch allows you to enable or disable the IP DSCP priority.
Command Attributes
• IP DSCP Priority Status – The following options are:
- Disabled – Disables the priority service. (Default Setting:
Disabled)
- IP DSCP – Maps layer 3/4 priorities using Differentiated Services
Code Point Mapping.
Web – Click Priority, IP DSCP Priority Status. Select IP DSCP from the
drop down menu, then click Apply.
Figure 3-93. IP DSCP Priority Status
To Next Page
Loading...
