SMC Networks TigerSwitch SMC6128PL2

S IMPLE N ETWORK M ANAGEMENT P ROTOCOL
3-63
Figure 3-30. Configuring SNMPv3 Groups
Setting SNMPv3 Views
SNMPv3 views are used to restrict user access to specified portions of the
MIB tree. The predefined view “defaultview” includes access to the entire
MIB tree.
Command Attributes
• View Name – The name of the SNMP view. (Range: 1-64 characters)
• View OID Subtrees – Shows the currently configured object
identifiers of branches within the MIB tree that define the SNMP view.