EasyManuals Logo

SMC Networks TigerSwitch SMC6128PL2 User Manual

SMC Networks TigerSwitch SMC6128PL2
658 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #610 background imageLoading...
Page #610 background image
4-292
ip dhcp restart (4-292)
ip default-gateway
This command establishes a static route between this switch and devices
that exist on another network segment. Use the no form to remove the
static route.
Syntax
ip default-gateway gateway
no ip default-gateway
gateway - IP address of the default gateway
Default Setting
No static route is established.
Command Mode
Global Configuration
Command Usage
A gateway must be defined if the management station is located in a
different IP segment.
Example
The following example defines a default gateway for this device:
Related Commands
show ip redirects (4-294)
ip dhcp restart
This command submits a BOOTP or DHCP client request.
Default Setting
None
Command Mode
Privileged Exec
Console(config)#ip default-gateway 10.1.1.254
Console(config)#

Table of Contents

Other manuals for SMC Networks TigerSwitch SMC6128PL2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SMC Networks TigerSwitch SMC6128PL2 and is the answer not in the manual?

SMC Networks TigerSwitch SMC6128PL2 Specifications

General IconGeneral
BrandSMC Networks
ModelTigerSwitch SMC6128PL2
CategorySwitch
LanguageEnglish

Related product manuals