SMC Networks TigerSwitch SMC6128PL2

S YSTEM M ANAGEMENT C OMMANDS
4-35
Syntax
hostname name
no hostname
name - The name of this host. (Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
User Access Commands
The basic commands required for management access are listed in this
section. This switch also includes other options for password checking via
the console or a Telnet connection (page 4-15), user authentication via a
remote authentication server (page 4-96), and host access authentication
for specific ports (page 4-110).
Console(config)#hostname RD#1
Console(config)#
Table 4-9 User Access Commands
Command Function Mod
e
Pag
e
username Establishes a user name-based authentication
system at login
GC 4-36
enable password Sets a password to control access to the
Privileged Exec level
GC 4-37