SMC Networks TigerSwitch SMC6128PL2 User Manual

S PANNING T REE C OMMANDS
4-193
Spanning Tree Commands
This section includes commands that configure the Spanning Tree
Algorithm (STA) globally for the switch, and commands that configure
STA for the selected interface.
Spanning Tree Commands
Command Function Mode Page
spanning-tree Enables the spanning tree protocol GC 4-194
spanning-tree mode Configures STP, RSTP or MSTP mode GC 4-195
spanning-tree
forward-time
Configures the spanning tree bridge
forward time
GC 4-197
spanning-tree
hello-time
Configures the spanning tree bridge hello
time
GC 4-197
spanning-tree
max-age
Configures the spanning tree bridge
maximum age
GC 4-198
spanning-tree priority Configures the spanning tree bridge
priority
GC 4-199
spanning-tree
path-cost method
Configures the path cost method for
RSTP/MSTP
GC 4-200
spanning-tree
transmission-limit
Configures the transmission limit for
RSTP/MSTP
GC 4-201
spanning-tree
mst-configuration
Changes to MSTP configuration mode GC 4-201
mst vlan Adds VLANs to a spanning tree instance MST 4-202
mst priority Configures the priority of a spanning tree
instance
MST 4-203
name Configures the name for the multiple
spanning tree
MST 4-204
revision Configures the revision number for the
multiple spanning tree
MST 4-204
max-hops Configures the maximum number of hops
allowed in the region before a BPDU is
discarded
MST 4-205

SMC Networks TigerSwitch SMC6128PL2 Specifications

General

Brand	SMC Networks
Model	TigerSwitch SMC6128PL2
Category	Switch
Language	English