C
ONFIGURING
THE
S
WITCH
3-250
In some cases, the switch may receive DHCP packets from a client that
already includes DHCP Option 82 information. The switch can be
configured to set the action policy for these packets. Either the switch can
discard the Option 82 information, keep the existing information, or
replace it with the switch’s relay information.
Note: DHCP snooping must be enabled on the switch for the DHCP
Option 82 information to be inserted into packets.
Command Attributes
• DHCP Snooping Information Option Status – Enables or disables
DHCP Option 82 information relay.
• DHCP Snooping Information Option Policy – Sets the DHCP
snooping information option policy for DHCP client packets that
include Option 82 information.
- Replace – Overwrites the DHCP client packet information with the
switch’s relay information.
- Keep – Retains the client’s DHCP information.
- Drop – Discards the Option 82 information in a packet and then
floods it to the entire VLAN.
Web – Click DHCP Snooping, Information Option Configuration.
Figure 3-111. DHCP Snooping Information Option Configuration
To Next Page
Loading...
Need help?
General
