VLAN C
OMMANDS
4-219
GVRP defines a way for switches to exchange VLAN information in
order to register VLAN members on ports across the network. This
function should be enabled to permit automatic VLAN registration,
and to support VLANs which extend beyond the local switch.
Example
show bridge-ext
This command shows the configuration for bridge extension commands.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
See “Displaying Basic VLAN Information” on page -180 and
“Displaying Bridge Extension Capabilities” on page -18 for a
description of the displayed items.
Example
switchport gvrp
This command enables GVRP for a port. Use the no form to disable it.
Syntax
Console(config)#bridge-ext gvrp
Console(config)#
Console#show bridge-ext
Max support vlan numbers: 255
Max support vlan ID: 4094
Extended multicast filtering services: No
Static entry individual port: Yes
VLAN learning: SVL
Configurable PVID tagging: Yes
Local VLAN capable: No
Traffic classes: Enabled
Global GVRP status: Enabled
GMRP: Disabled
Console#
To Next Page
Loading...
