SMC Networks TigerSwitch SMC6128PL2

C ONFIGURING THE S WITCH
3-252
CLI – This example shows how to enable the DHCP Snooping Trust
Status for ports
.
DHCP Snooping Binding Information
Displays the DHCP snooping binding information.
Command Attributes
• No. – Entry number for DHCP snooping binding information.
• Unit – Stack unit.
• Port – Port number.
• VLAN ID – ID of a configured VLAN (Range: 1-4094)
• MAC Address – A valid unicast MAC address.
• IP Address – A valid unicast IP address.
• IP Address Type – Indicates an IPv4 or IPv6 address type.
• Lease Time (Seconds) – The time after which an entry is removed
from the table.
Web – Click DHCP Snooping, DHCP Snooping Binding Information.
Figure 3-113. DHCP Snooping Binding Information
Console(config)#interface ethernet 1/5
Console(config-if)#ip dhcp snooping trust
4-305
Console(config-if)#