C
OMMAND
L
INE
I
NTERFACE
4-82
show running-config
This command displays the configuration information currently in use.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
• Use this command in conjunction with the show startup-config
command to compare the information in running memory to the
information stored in non-volatile memory.
• This command displays settings for key command modes. Each mode
group is separated by “!” symbols, and includes the configuration
mode command, and corresponding commands. This command
displays the following information:
• MAC address for each switch in the stack
• SNTP server settings
• Local time zone
• SNMP community strings
• Users (names, access levels, and encrypted passwords)
• Event log settings
• VLAN database (VLAN ID, name and state)
• VLAN configuration settings for each interface
• IP address configured for the switch
• Layer 4 precedence settings
• Any configured settings for the console port and Telnet
To Next Page
Loading...
