C
OMMAND
L
INE
I
NTERFACE
4-118
show dot1x
This command shows general port authentication related settings on the
switch or a specific interface.
Syntax
show dot1x [statistics] [interface interface]
• statistics - Displays dot1x status for each port.
•interface
• ethernet unit/port
- unit - Stack unit. (Always unit 1)
- port - Port number. (Range: 1-52)
Command Mode
Privileged Exec
Command Usage
This command displays the following information:
- Global 802.1X Parameters – Shows whether or not 802.1X port
authentication is globally enabled on the switch.
- 802.1X Port Summary – Displays the port access control parameters
for each interface, including the following items:
- Status – Administrative state for port access control.
- Operation Mode– Dot1x port control operation mode
(page 4-113).
- Mode – Dot1x port control mode (page 4-112).
- Authorized – Authorization status (yes or n/a - not authorized).
To Next Page
Loading...
Need help?
General
