SMC Networks TigerSwitch SMC6128PL2 User Manual

C OMMAND L INE I NTERFACE
4-80
System Status Commands
show startup-config
This command displays the configuration file stored in non-volatile
memory that is used to start up the system.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
• Use this command in conjunction with the show running-config
command to compare the information in running memory to the
information stored in non-volatile memory.
• This command displays settings for key command modes. Each mode
group is separated by “!” symbols, and includes the configuration
mode command, and corresponding commands. This command
displays the following information:
Table 4-23 System Status Commands
Command Function Mod
e
Pag
e
show
startup-config
Displays the contents of the configuration file
(stored in flash memory) that is used to start up
the system
PE 4-80
show
running-config
Displays the configuration data currently in use PE 4-82
show system Displays system information NE,
PE
4-84
show users Shows all active console and Telnet sessions,
including user name, idle time, and IP address of
Telnet clients
NE,
PE
4-85
show version Displays version information for the system NE,
PE
4-85

SMC Networks TigerSwitch SMC6128PL2 Specifications

General

Brand	SMC Networks
Model	TigerSwitch SMC6128PL2
Category	Switch
Language	English