A
UTHENTICATION
C
OMMANDS
4-103
Example
radius-server retransmit
This command sets the number of retries. Use the no form to restore the
default.
Syntax
radius-server retransmit number_of_retries
no radius-server retransmit
number_of_retries - Number of times the switch will try to
authenticate logon access via the RADIUS server. (Range: 1-30)
Default Setting
2
Command Mode
Global Configuration
Example
radius-server timeout
This command sets the interval between transmitting authentication
requests to the RADIUS server. Use the no form to restore the default.
Syntax
radius-server timeout number_of_seconds
no radius-server timeout
number_of_seconds - Number of seconds the switch waits for a reply
before resending a request. (Range: 1-65535)
Default Setting
5
Console(config)#radius-server key green
Console(config)#
Console(config)#radius-server retransmit 5
Console(config)#
To Next Page
Loading...
Need help?
General
