C
OMMAND
L
INE
I
NTERFACE
4-148
snmp-server view
This command adds an SNMP view which controls user access to the MIB.
Use the
no
form to remove an SNMP view.
Syntax
snmp-server view view-name oid-tree {included | excluded}
no snmp-server view view-name
-view-name - Name of an SNMP view. (Range: 1-64 characters)
-oid-tree - Object identifier of a branch within the MIB tree. Wild cards
can be used to mask a specific portion of the OID string. (Refer to
the examples.)
-included - Defines an included view.
-excluded - Defines an excluded view.
Default Setting
defaultview (includes access to the entire MIB tree)
Command Mode
Global Configuration
Command Usage
•Views are used in the snmp-server group command to restrict user
access to specified portions of the MIB tree.
•The predefined view “defaultview” includes access to the entire MIB
tree.
Examples
This view includes MIB-2.
This view includes the MIB-2 interfaces table, ifDescr. The wild card is
used to select all the index values in this table.
Console(config)#snmp-server view mib-2 1.3.6.1.2.1 included
Console(config)#
Console(config)#snmp-server view ifEntry.2 1.3.6.1.2.1.2.2.1.*.2
included
Console(config)#
To Next Page
Loading...
Need help?
General
