B
ASIC
C
ONFIGURATION
3-45
Web – Select SNTP, Configuration. Modify any of the required
parameters, and click Apply.
Figure 3-21. SNTP Configuration
CLI – This example configures the switch to operate as an SNTP unicast
client and then displays the current time and settings.
Console(config)#sntp server 10.1.0.19 137.82.140.80 128.250.36.2 4-75
Console(config)#sntp poll 60 4-76
Console(config)#sntp client 4-74
Console(config)#exit
Console#show sntp
Current time: Jan 6 14:56:05 2004
Poll interval: 60
Current mode: unicast
SNTP status : Enabled
SNTP server 10.1.0.19 137.82.140.80 128.250.36.2
Current server: 128.250.36.2
Console#
To Next Page
Loading...
Need help?
General
