C
OMMAND
L
INE
I
NTERFACE
4-136
Privileged Executive
Example
SNMP Commands
Controls access to this switch from management stations using the Simple
Network Management Protocol (SNMP), as well as the error types sent to
trap managers.
SNMP Version 3 also provides security features that cover message
integrity, authentication, and encryption; as well as controlling user access
to specific areas of the MIB tree. To use SNMPv3, first set an SNMP
engine ID (or accept the default), specify read and write access views for
the MIB tree, configure SNMP user groups with the required security
model (i.e., SNMP v1, v2c or v3) and security level (i.e., authentication and
privacy), and then assign SNMP users to these groups, along with their
specific authentication and privacy passwords.
Console#show access-group
Interface ethernet 1/1
IP access-list jerry in
.
.
.
Interface ethernet 1/52
IP access-list jerry in
Console#
SNMP Commands
Command Function Mod
e
Page
snmp-server Enables the SNMP agent GC 4-13
7
show snmp Displays the status of SNMP communications NE,
PE
4-13
8
snmp-server
community
Sets up the community access string to permit
access to SNMP commands
GC 4-13
9
snmp-server
contact
Sets the system contact string GC 4-14
0
To Next Page
Loading...
Need help?
General
