SMC Networks TigerSwitch SMC6128PL2

4-218
Note: GVRP is not supported in the current software.
bridge-ext gvrp
This command enables GVRP globally for the switch. Use the no form to
disable it.
Syntax
[no] bridge-ext gvrp
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
GVRP and Bridge Extension Commands
Command Function Mod
e
Pag
e
bridge-ext gvrp Enables GVRP globally for the switch GC 4-21
8
show bridge-ext Shows the global bridge extension
configuration
PE 4-21
9
switchport gvrp Enables GVRP for an interface IC 4-21
9
switchport forbidden
vlan
Configures forbidden VLANs for an
interface
IC 4-23
1
show gvrp configuration Displays GVRP configuration for the
selected interface
NE,
PE
4-22
0
garp timer Sets the GARP timer for the selected
function
IC 4-22
1
show garp timer Shows the GARP timer for the selected
function
NE,
PE
4-22
2