C
ONFIGURING
THE
S
WITCH
3-180
Web – Click VLAN, 802.1Q VLAN, GVRP Status. Enable or disable
GVRP, click Apply
Figure 3-74. Globally Enabling GVRP
CLI – This example enables GVRP for the switch.
Displaying Basic VLAN Information
The VLAN Basic Information page displays basic information on the
VLAN type supported by the switch.
Field Attributes
• VLAN Version Number
9
– The VLAN version used by this switch
as specified in the IEEE 802.1Q standard.
• Maximum VLAN ID – Maximum VLAN ID recognized by this
switch.
• Maximum Number of Supported VLANs – Maximum number of
VLANs that can be configured on this switch.
Console(config)#bridge-ext gvrp 4-168
Console(config)#
9.
Web Only.
To Next Page
Loading...
