SNMP C
OMMANDS
4-137
snmp-server
This command enables the SNMPv3 engine and services for all
management clients (i.e., versions 1, 2c, 3). Use the no form to disable the
server.
Syntax
[no] snmp-server
Default Setting
snmp-server
location
Sets the system location string GC 4-14
1
snmp-server host Specifies the recipient of an SNMP
notification operation
GC 4-14
1
snmp-server enable
traps
Enables the device to send SNMP traps (i.e.,
SNMP notifications)
GC 4-14
4
snmp-server
engine-id
Sets the SNMP engine ID GC 4-14
5
show snmp
engine-id
Shows the SNMP engine ID PE 4-14
7
snmp-server view Adds an SNMP view GC 4-14
8
show snmp view Shows the SNMP views PE 4-14
9
snmp-server group Adds an SNMP group, mapping users to views GC 4-15
0
show snmp group Shows the SNMP groups PE 4-15
1
snmp-server user Adds a user to an SNMP group GC 4-15
3
show snmp user Shows the SNMP users PE 4-15
5
SNMP Commands (Continued)
Command Function Mod
e
Page
To Next Page
Loading...
Need help?
General
