TP-Link TL-SL5428E - ip dos-prevent syn-rate

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
90
Rctcogvgt"
ping-rate —— Specify the transmission rate of the Ping packets when the
Defend Type Ping Flooding is enabled. The options are 128k、256k、512k、1m、
2m、4m in bps. By default, the value is 128k.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Specify the transmission rate of the Ping packets as 256k:
VN/UN764:G*eqphki+%kr"fqu/rtgxgpv"rkpi/tcvg 256k
kr"fqu/rtgxgpv"u{p/tcvg"
Fguetkrvkqp"
The"kr" fqu/rtgxgpv"u{p/tcvg"command is used to configure the transmission
rate of the SYN/SYN-ACK packets. To restore to default, please use pq" kr"
fqu/rtgxgpv"u{p/tcvg"command.
U{pvcz"
kr"fqu/rtgxgpv"u{p/tcvg syn-rate
pq"kr"fqu/rtgxgpv"u{p/tcvg"
Rctcogvgt"
syn-rate —— Specify the transmission rate of the SYN/SYN-ACK packets when
the Defend Type SYN/SYN-ACK Flooding is enabled. The options are 128k、
256k、512k、1m、2m、4m in bps. By default, the value is 128k.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Specify the transmission rate of the SYN/SYN-ACK packets as 1m:
VN/UN764:G*eqphki+%kr"fqu/rtgxgpv"u{p/tcvg 1m